HomeNew ProductsProduct InquiryAbout UsContacting UsTrade Shows
Powertek Chassis Dynamometer
Chassis Suspension Fixture
Crash Test Vehicle
Crash Tester
Wind Tunnels
Engine Test Stands
Engineering Labs

GDJ, Inc.
440/975-0258
440/918-0407 Fax
sales@gdjinc.com

2006-2008 © GDJ Inc.

Engine Test Stands

Test Stand Intro

Single Cylinder Dynamometer

Three Cylinder Dynamometer

Gas Turbine Engine

Curricula

Three Cylinder Dynamometer

OverviewFeaturesSpecsInstrumentationModelsBrochure

Engine Performance Specification - Gasoline

No of Cylinders

3

Bore x Stroke

68mm x 64mm

Displacement

697cc

Gross Power (nominal)

17.5 kW (23.5 hp)

Gross Torque (nominal)

50 Nm (36.8 ft-lbs)

Electric Starter

0.8 kW

Alternator

40A

Engine Performance Specification - Diesel

No of Cylinders

3

Bore x Stroke

68mm x 64mm

Displacement

697cc

Gross Power (nominal)

14.5 kW (19.5 hp)

Gross Torque (nominal)

44 Nm (32.5 ft-lbs)

Electric Starter

1.0 kW

Alternator

40A

Installation Requirements

  • The equipment should be installed in a well ventilated area.
  • The engine exhaust may be connected to a duct pipe and vented external to the building.
  • For exhaust ducts of greater than 20 feet (6m), a fan assisted duct is recommended. (The engine incorporates an adjustable exhaust back pressure valve and sensor to allow variations in installations to be compensated for).

The following services are required:

  • Model PT-300 thru 350 – 220V, 60Hz, single phase electricity supply
  • Model PT-320 & 330 – Natural gas supply, between 150mm and 350mm water gauge

Essential Additional Equipment

The user must have access to a PC running Windows™ 98/XP.

Recommended Additional Equipment

It is recommended that the user has access to a barometer for measuring air pressure.

Note: GDJ is constantly improving its products. Specifications are due to change from upgrades.